Roomba 500 Serie Meldingen. Mijn Roomba piept, knippert en praat!


Roomba geeft foutmeldingen door een "uh-oh" geluid te maken gevolgd door een aantal piepjes of gesproken melding. Als u de melding niet goed kon verstaan of de piepjes gingen te snel om te tellen dan kunt u door op de bumper of de Clean knop te drukken de melding opnieuw horen. Hieronder in de tabel een overzicht van de meldingen:

Let op: Als het error lampje knippert tijdens opladen gaat er iets mis met de accu of oplader, zie daarvoor de tweede tabel hieronder..

Roomba beeps ...

or Roomba says ...

Likely Cause

What To Do

1 beep

Error 1. Move Roomba to a new location then press CLEAN to restart.Roomba is stuck with a Wheel hanging down or Roomba is stuck.Click here for Error 1 troubleshooting instructions.

2 beeps

Error 2. Open Roomba’s brush cage and clean brushes.  Roomba's Main Brushes cannot turn.Click here for Error 2 troubleshooting instructions.

5 beeps

Error 5. Spin Roomba’s side wheels to clean.  Roomba's Side Wheel is stuck.Click here for Error 5 troubleshooting instructions.

6 beeps

Error 6. Move Roomba to a new location then press CLEAN to restart.  Roomba’s Cliff Sensors are dirty or Roomba is stuck hanging over a cliff.Click here for Error 6 troubleshooting instructions.

7 beeps

Error 7. Spin Roomba’s side wheels to clean.  Roomba's Side Wheel is stuck.Click here for Error 7 troubleshooting instructions.
8 beeps Roomba's Front Wheel is stuck or Roomba is stuck.Click here for Error 8 troubleshooting instructions.

9 beeps

Error 9. Tap Roomba’s bumper to clean.Roomba Bumper is compressed or the Bumper Sensor is dirty.Click here for Error 9 troubleshooting instructions.

 

Error 10. Spin Roomba’s side wheels to clean.

Roomba’s Side Wheel is stuck or its Bumper is not registering obstacles.

Click here for Error 10 troubleshooting instructions.

11 beeps Roomba’s Bumper is not registering obstacles. Roomba may be stuck in one place.

Click here for Error 11 troubleshooting instructions.

12 beeps A Cliff Sensor is dirty or broken.Click here for Error 12 troubleshooting instructions.
 

Please charge Roomba.

Roomba's battery is discharged.

Plug Roomba into the power supply (or place Roomba on the Home Base) to charge. Click here for an overview on charging.

 

Please inspect and clean Roomba's Cliff Sensors.

Roomba's Cliff Sensors are
dirty.

Inspect and clean Roomba's Cliff Sensors.Click here for Cliff Sensor troubleshooting instructions.

 

Please inspect and clean Roomba's Wheels.

Roomba's Side Wheel is stuck.

Inspect and clean Roomba's side wheels.Click here for wheel troubleshooting instructions.

 

Please remove and clean Roomba's brushes.

Roomba's Main Brushes cannot turn.

Remove and clean Roomba's brushes. Click here for an instructional video. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Roomba 500 Series Charging Errors - my Roomba's troubleshooting light blinks

If the Troubleshooting Light is blinking while Roomba is charging, Roomba has experienced a charging error. If an error code is emitted while running or standing, consult Roomba 500 Series Troubleshooting.

Roomba 500 error

Roomba blinks (... and/or may say) while charging

Likely CauseWhat To Do

1 blink 

(...Charging Error one)

Roomba's battery is not connected.Confirm that Roomba's battery pull-tab is removed. Click here to troubleshoot the pull-tab.

2 blinks 

(...Charging Error two)

Roomba has a charging error.Allow Roomba to cool down for at least one hour. Charge Roomba again in a cooler environment.

3 blinks

(...Charging Error three)

Roomba has a charging error.Reset Roomba’s software by simultaneously holding down the two buttons above and below CLEAN for 10 seconds. This will clear all scheduled cleaning times, reset the clock and may resolve some software issues. Try charging Roomba again.

5 blinks

(...Charging Error five)

Roomba has a charging error.Click here to troubleshoot Charging Error 5.

6 blinks

(...Charging Error six)

Roomba's battery overheated.Allow Roomba to cool down for at least one hour. Charge Roomba again in a cooler environment.

7 blinks

(...Charging Error seven)

Roomba's battery is not cooling down.Allow Roomba to cool down for at least one hour. Charge Roomba again in a cooler environment.

 

Periodically check that the green light on the charger (Power Supply) is lit when plugged in.

If out or blinking, please contact us, 088-8780000 or email to info@cyberhuis.nl.

>TERUG (Back)